epson printer nx330 not recognizing epson ink cartridge

#EPSON PRINTER NX330 NOT RECOGNIZING EPSON INK CARTRIDGE INSTALL#
#EPSON PRINTER NX330 NOT RECOGNIZING EPSON INK CARTRIDGE DRIVER#

Set the paper lever to the secured position. The paper lever is in the release position. The tank that catches excess ink, known as the maintenance tank, is full.

#EPSON PRINTER NX330 NOT RECOGNIZING EPSON INK CARTRIDGE INSTALL#

Install a cartridge or lower the lever to lock the cartridge in. Remove the ink cartridge and install a compatible cartridge.Įither an ink cartridge has not been installed or the ink lever is set to the release position. One of more of the ink cartridges is emptyĪn ink cartridge that is not to be used with this Epson printer has been installed. The roll of paper is not correctly set or aligned. Try a cold start if your remanufactured Epson ink cartridge is not recognized. Hold the Pause button down for 3 seconds to cancel task. The ink cartridge loaded is detected as non-Genuine Epson ink. Also try resetting the printer and the computer. Confirm you are trying to load the correct driver. Stop printing and hold the Pause button down for 3 seconds.

#EPSON PRINTER NX330 NOT RECOGNIZING EPSON INK CARTRIDGE DRIVER#

Incorrect driver has been loaded or the data received by the printer is not correct. When automatic cutting is activated, this error means the paper is not cut.Ĭheck to see that the cutter is installed properly and is not dull, then remove the uncut paper and try again. Reload the paper, making sure it is straight and aligned properly. The paper is not loaded correctly in the tray. Try loading it again and make sure the paper is not damaged. The paper that is currently loaded cannot be detected or is curled. Load more sheets of paper or a new roll of paper. There is no paper loaded in the tray or present on the roll. The size of paper in the tray does not match the settings. The media type that is in the tray does not match the paper settings.Ĭhange the settings or the paper so that they match. Run the Head Cleaning Utility, or you can try to unclog the nozzles without wasting ink. Look up the code in your manual and then contact Epson’s technical support for a replacement.

Refer to your manual for the codes for each part. The numbers following the message will be the part code. You can print until ink runs out, but quality may suffer.Īn internal part of the printer is worn and needs to be replaced. One or more ink cartridges are almost empty. The tank that catches excess ink, known as the maintenance tank, is nearly full. Here is a list of some of the most common Epson printer error messages: Message Epson printers typically have an LCD display that will show error messages, rather than number codes when there is a problem, but these messages can sometimes be difficult to decipher. Epson printers are generally pretty reliable, but they can still experience problems from time to time.

Epson printer nx330 not recognizing epson ink cartridge